快速浏览

技术文档

定购信息

更多信息

所有内容

概述

完整的数据资料 (PDF, 2.6MB) 英文 下载 The MAX1329/MAX1330 are smart data acquisition systems (DASs) based on a successive approximation register (SAR) analog-to-digital converter (ADC). These devices are highly integrated, offering an ADC, digital-to- analog converters (DACs), operational amplifiers (op amps), voltage reference, temperature sensors, and analog switches in the same device. The MAX1329/MAX1330 offer a single ADC with a reference buffer. The ADC is capable of operating in one of two user-programmable modes. In normal mode, the ADC provides up to 12 bits of resolution at 312ksps. In DSP mode, the ADC provides up to 16 bits of resolution at 1000sps. The ADC accepts one external differential input or two external single-ended inputs as well as inputs from other circuitry on-board. An on-chip programmable gain amplifier (PGA) follows the analog inputs, reducing external circuitry requirements. The PGA gain is adjustable from 1V/V to 8V/V. The MAX1329/MAX1330 operate from a 1.8V to 3.6V digital power supply. Shutdown and sleep modes are available for power-saving applications. Under normal operation, an internal charge pump boosts the supply voltage for the analog circuitry when the supply is < 2.7V. The MAX1329/MAX1330 offer four analog programmable I/Os (APIOs) and four digital programmable I/Os (DPIOs). The APIOs can be configured as general-purpose logic inputs and outputs, as a wake-up function, or as a buffer and level shifter for the serial interface to communicate with slave devices powered by the analog supply, AVDD. The DPIOs can be configured as general-purpose logic inputs and outputs as well as inputs to directly control the ADC conversion rate, the analog switches, the loading of the DACs, wake-up, sleep, and shutdown modes, and as an interrupt for when the analog-to-digital conversion is complete. The MAX1329 includes dual 12-bit force-sense DACs with a programmable reference buffer and one op amp. The MAX1330 provides one 12-bit force-sense DAC with a programmable reference buffer and two op amps. For the MAX1329/MAX1330, a 16-word DAC FIFO can be used with the DACA for direct digital synthesis (DDS) of waveforms. The 4-wire serial interface is compatible with SPI™, QSPI™, and MICROWIRE™.

关键特性		应用/使用
1.8V to 3.6V Single Digital Supply Operation Internal Charge Pump for Analog Circuits (2.7V to 5.5V) 12-Bit SAR ADC 12 Bits, 312ksps, No Missing Codes 16 Bits, 1000sps, DSP Mode 16-Word FIFO and 20-Bit Accumulator PGA with Gains of 1, 2, 4, and 8 Unipolar and Bipolar Modes 16-Input Differential Multiplexer Dual 12-Bit Force-Sense DACs 16-Word FIFO (DACA Only) Independent Voltage References for ADC and DACs Internal 2.5V Reference Adjustable Reference Buffers Provide 1.25V, 2.048V, or 2.5V System Support ADC Alarm Register Uncommitted Op Amps Dual SPDT Analog Switches Internal/External Temperature Sensor Internal Oscillator with Clock I/O Digital Programmable I/O Analog Programmable I/O Programmable Interrupts Accurate Supply Voltage Measurement Programmable Dual Voltage Monitors SPI-/QSPI-/MICROWIRE-Compatible, 4-Wire Serial Interface Space-Saving, 6mm x 6mm, 40-Pin Thin QFN Package		电池供电和便携式设备 数据采集系统 电化学与光传感器 低成本CODEC 医疗仪器

图表

典型工作电路

没有找到你需要的产品吗？

应用工程师帮助选型，下个工作日回复 参数搜索 应用帮助

快速浏览

技术文档

定购信息

更多信息

概述   关键特性   应用/使用   关键指标   图表

数据资料   应用笔记   设计指南   工程期刊   可靠性报告   软件/模型   评估板

价格与供货   样品   在线订购   封装信息   无铅信息

相关产品   注释、注解   评估板