MAX1501 高集成度、线性电池充电器，带有热调节，用于便携式应用

快速浏览

技术文档

定购信息

更多信息

所有内容

概述

完整的数据资料 (PDF, 344kB)
英文

下载

The MAX1501 intelligent, constant-current, constantvoltage (CCCV), temperature-regulated battery charger charges a single lithium-ion (Li+) cell or three-cell NiMH/NiCd batteries. The device integrates the currentsense resistor, PMOS pass element, and thermalregulation circuitry, while eliminating the reverseblocking Schottky diode to create the simplest charging solution for hand-held equipment.

The MAX1501 functions as a stand-alone charger to control the charging sequence from the prequalification state through fast charge, top-off, and charge termination for single-cell Li+ or three-cell NiMH/NiCd batteries. Alternatively, the MAX1501 collaborates with a host microprocessor to determine the best charging algorithm. Proprietary thermal-regulation circuitry limits the die temperature when fast charging or while exposed to high ambient temperatures, allowing maximum charging current without damaging the charger. The MAX1501 continually supplies a regulated output voltage under no-battery conditions, allowing battery changing.

The device achieves high flexibility by providing an adjustable fast-charge current, top-off current, safety timer (disabled in the MAX1501Z), and thermal-regulation setpoint. Other features include input power detection (ACOK-bar) and input under-/overvoltage protection. The MAX1501 provides active-low control inputs.

The MAX1501 accepts a 4.5V to 13V supply, but disables charging when the input voltage exceeds 6.5V, preventing excessive power dissipation. The MAX1501 operates over the extended temperature range (-40°C to +85°C) and is available in a compact 16-pin thermally enhanced 5mm x 5mm thin QFN package with 0.8mm profile.

关键特性

应用/使用

Stand-Alone or Microprocessor-Controlled (µP) Linear 1-Cell Li+ or 3-Cell NiMH/NiCd Battery Charger
No FET, Reverse-Blocking Diode, or Current- Sense Resistor Required
1.4A (max) Programmable Fast-Charge Current
+95°C, +115°C, and +135°C Proprietary Programmable Die Temperature Regulation Control
4.5V to 13V Input Voltage Range with Input Overvoltage (OVLO) Protection Above 6.5V
Programmable Top-Off Current Threshold: 10%, 20%, or 30% of the Fast-Charge Current
Charge-Current Monitor for Fuel Gauging
Programmable Safety Timer (3, 4.5, or 6 hours)
Input Power Detection Output (active-low ACOK)and Charge Enable Input (active-low CHGEN)
Automatic Recharge
Digital Soft-Start Limits Inrush Current
Charge Status Outputs for LEDs or µP Interface

	Bluetooth®设备
	蜂窝电话/无绳电话
	充电托架和坞站
	数码相机与MP3播放器
	PDA
	USB应用

Key Specifications: Battery Chargers

Part Number

Cell Chemistry

Number of NiMH or NiCd cells

Number of Lithium-Ion cells

Protected V_IN (max) (V)

Charging V_IN (max) (V)

Internal FET/Transistor

Charger (V)

Charge Rate Set by

Max. Charge Current (A)

Charge Termination

Charge Regulation

Features

EV-Kit

Package

Smallest Available Package (max w/pins) (mm²)

RoHS Available

Operating Temp. Range (°C)

Price^**

MAX1501

Li-Ion
Li-Polymer
NiCd
NiMH

6.25

4.1
4.2
4.5
4.95

Resistor

1.4

Timer

Linear

•	Stand Alone

•	Thermal Die Regulation

•

Timer

Yes

THIN QFN/16

Yes

-40 to +85

$2.05 @ 1k

See All Battery Chargers (60)

Notes:
^**This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.