ENGLISH 简体中文 日本語 한국어  



   
 
请输入关键词或器件型号    



DS2502-E64
IEEE EUI-64节点地址芯片


  快速浏览     技术文档     定购信息     更多信息     所有内容  
数据资料
完整的数据资料 (PDF, 47kB)
英文 下载数据资料(PDF)下载

概述
The DS2502-E64 is a variant of the DS2502 1024-bit add-only memory. It differs from the standard DS2502 in its custom ROM family code 89H, and the UniqueWare™ identifier 5E7 in place of the upper 12 bits of the standard ROM serialization field. Otherwise, the electrical and logical behavior is identical to that of the DS2502. For technical details please refer to the DS2502 data sheet. The first 32 bytes of the DS2502-E64's EPROM memory contain a globally unique 64-bit node address (EUI-64) and are write-protected. The data structure follows the conventions of UniqueWare devices using default data structure (Figure 1 of data sheet).

The data record starts with a length byte (0CH) and the 4-byte UniqueWare project ID 00001128H. The next eight bytes contain the EUI-64 global identifier (node address), which consists of an incrementing 40-bit extension identifier and the IEEE®-assigned 24-bit company ID value 006035H. A 16-bit CRC ends the data record. The remaining bytes of the 32-byte memory page remain unprogrammed. Neither the 40-bit extension identifier nor the 24-bit company ID are related to the 64-bit ROM registration number, which is distinct from the IEEE standard 1394-1995 node address. The ROM registration number is used to provide a unique address to access the DS2502-E64 when multidropped on a 1-Wire® bus.

关键特性
  • IEEE-approved factory programmed 64-bit node address chip (EUI-64) with 768 bits user-programmable OTP-EPROM communicates with the economy of one signal plus ground
  • Meets the node identification requirements of IEEE standard 1394-1995 (FireWire™)
  • Unique, factory-lasered 64-bit registration number assures absolute traceability because no two parts are alike
  • Built-in multidrop controller ensures compatibility with other 1-Wire products
  • Device is an add-only memory where additional data can be programmed into EPROM without disturbing existing data
  • Reduces control, address, data, power, and programming signals to a single pin
  • Directly connects to a single port pin of a microprocessor and communicates at up to 16.3kbps
  • Low cost TO-92 or TSOC surface mount packages
  • Reads over a wide voltage range of 2.8V to 6.0V from -40°C to +85°C; programs at 11.5V to 12.0V from -40°C to +50°C

评估板

设计指南
  • 1-Wire®产品 (PDF)

    可靠性报告
  • 申请可靠性报告: (English only)

    软件/模型

    定购信息
    注:

    1. 购买产品,请访问:http://www.maxim-ic.com.cn/sales
    2. 没有找到您所需要的器件?请咨询我们的应用工程师。我们的专家会帮助您找到合适的器件,通常在一个工作日内回复。
    3. 型号尾缀:T或T&R = 卷带; + = RoHS/无铅; # = RoHS/无铅豁免权。详细信息请参考:完整的数据资料型号命名规则
    4. * “封装代码/变更”提供产品使用的变更信息。注意:型号尾缀中的“+”、“#”和“-”表示器件的RoHS状况,封装图上可能显示不同的尾缀字符。


    器件: 1-4 of 4

    DS2502-E64 免费样品 采购
    封装: 类型 引脚 占位面积
      封装图编码/变更 *
    温度 RoHS/无铅?
    材料分析
    DS2502-E64   IEEE EUI-64节点ID  
    TO92;3引脚;20mm²
    封装图: 21-0248 (PDF)
    Land Pattern: Not Applicable
    使用封装码/变更:Q3-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    DS2502-E64+    
    TO92;3引脚;20mm²
    封装图: 21-0248 (PDF)
    Land Pattern: Not Applicable
    使用封装码/变更:Q3+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    DS2502P-E64   IEEE EUI-64节点ID  
    TSOC;6引脚;18mm²
    封装图: 21-0382 (PDF)
    Land Pattern: Not Available
    使用封装码/变更:D6-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    DS2502P-E64+    
    TSOC;6引脚;18mm²
    封装图: 21-0382 (PDF)
    Land Pattern: Not Available
    使用封装码/变更:D6+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析

    更多信息
  • 传感器校准 (English only)

    没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    1999-10-20
    本页最后一次更新: 2007-06-22


            •         •         •     隐私权政策     •     法律声明

        © 2009 Maxim Integrated Products版权所有