The MicroLAN coupler is an essential component to build and control 1-Wire® networks with multi-level branching. In contrast to approaches that switch the ground line, the coupler maintains a common ground level for the whole network and keeps the inactive segments powered. This simplifies supplying central or local power for additional circuitry and prevents loss of status of parasitically powered devices. It also avoids disrupting communication caused by the parasitic power supply of 1-Wire devices after activating a branch. Both the main and the auxiliary 1-Wire output are supported by a smart-on command. This command generates a reset/presence sequence on the selected output before the electronic switch closes the contact to the 1-Wire bus. This way the bus master can apply a ROM function command (optionally followed by a memory function) to the devices on the just activated segment with all other devices in the network remaining deselected. This significantly speeds up the analysis of topology and population in a continuously changing network. The coupler also supports the bus master in detecting arrivals on the inactive segments of the network by responding to the conditional search command.
关键特性
Low impedance coupler to create large common-ground, multi-level 1-Wire networks
Keeps inactive branches pulled high to 5V
Simplifies network topology analysis by logically decoupling devices on active network segments
Conditional search for fast-event signaling
Auxiliary 1-Wire line to connect a memory chip or to be used as digital input
Programmable, general-purpose open-drain control output
Communicates at 16.3kbps
Unique, factory-lasered and tested 64-bit registration number assures absolute traceability because no two parts are alike
Built-in multidrop controller ensures compatibility with other 1-Wire products
Operating temperature range from -40°C to +85°C
Compact, low-cost 6-pin TSOC surface mount package
下载