ENGLISH 简体中文 日本語 한국어  

DS2405
可编址开关

新设计中建议使用升级产品
型号 替代产品 说明
DS2405 DS2413 DS2405不再供货,建议使用DS2413具有2通道GPIO的1-Wire器件作为替代产品。
DS2405Z-02F-4D43+ DS2413
DS2405AP-02C-166/T&R-VARTA DS2413
DS2405AP-02C-166/VARTA DS2413
DS2405AR-100-550 DS2413
DS2405Z+ DS2413
DS2405Z DS2413
DS2405P DS2413
DS2405P+ DS2413
DS2405AP-02C-114/T&R-SANYO DS2413
DS2405AP-02C-114/SANYO DS2413
DS2405-037-01+ DS2413
DS2405-037-01 DS2413
DS2405+ DS2413


  快速浏览     技术文档     定购信息     更多信息     所有内容  
数据资料
完整的数据资料 (PDF, 436kB)
英文 Download this datasheet in PDF format下载

概述
The DS2405 Addressable Switch is an open drain N-channel transistor that can be turned on or off by matching the 64-bit factory-lasered registration number within each part. The 64-bit number consists of an 8-bit family code, a unique 48-bit serial number, and an 8-bit cyclic redundancy check. Communication with the DS2405 follows the standard Dallas Semiconductor 1-Wire protocol and can be accomplished with a single port pin of a microcontroller. Multiple DS2405 devices can reside on a common 1-Wire bus creating a MicroLAN. The network controller circuitry is embedded within the chip including a search algorithm to determine the identity of each DS2405 on the network. The open drain output (PIO pin) for each DS2405 on the MicroLan can be independently toggled on or off whether there is one or many devices sharing the same 1-Wire bus. The logic level of the PIO pin for each device on the MicroLan can also be individually sensed and reported to the bus master.

关键特性
  • Open-drain PIO pin is controlled by matching 64-bit, laser-engraved registration number associated with each device
  • Logic level of open drain output can be determined over 1-Wire® bus for closed-loop control
  • PIO pin sink capability is greater than 4mA at 0.4V
  • Multiple DS2405s can be identified on a common 1-Wire bus and be turned on or off independent of other devices on the bus
  • Unique, factory-lasered and tested 64-bit registration number (8-bit family code +48-bit serial number +8-bit CRC tester) assures absolute identity because no two parts are alike
  • Built-in multidrop controller ensures compatibility with other MicroLAN products
  • Reduces control, address, data, and power to a single data pin
  • Directly connects to a single port pin of a microprocessor and communicates at up to 16.3kbits/s
  • 8-bit family code specifies DS2405 communications requirements to reader
  • 8-bit cyclic redundancy check ensures error-free selection
  • Zero standby power required
  • Low cost TO-92, SOT-223, or 6-pin TSOC surface mount package
  • 1-Wire communication operates over a wide voltage range of 2.8V to 6.0V from -40°C to +85°C

应用笔记
  • 应用笔记27:理解和运用Maxim iButton产品中的循环冗余校验(CRC) - DS2405
  • 应用笔记126:用软件实现1-Wire通信 - DS2405
  • 应用笔记155:1-Wire软件资源指南 - DS2405
  • 应用笔记158:用XML实现1-Wire标签 - DS2405
  • 应用笔记178:利用1-Wire产品标识印刷电路板 - DS2405
  • 应用笔记187:1-Wire搜索算法 - DS2405
  • 应用笔记192:DS2480B串行接口1-Wire线驱动器的使用 - DS2405
  • 应用笔记244:性能优异的1-Wire网络驱动器 - DS2405
  • App Note 1097: White Paper 2: Using the 1-Wire® Public Domain Kit - DS2405 (English only)
  • App Note 1100: White Paper 5: Using 1-Wire APIs for Data Sheet Commands - DS2405 (English only)
  • 应用笔记3989:通过单个触点增加控制、存储器、安全和混合信号功能 - DS2405

    评估板
  • DS9090K

    设计指南
  • 1-Wire®产品 (PDF)

    可靠性报告
  • 可靠性报告: DS2405.pdf (English only)

    软件/模型

    定购信息
    注:

    1. 购买产品,请访问:http://www.maxim-ic.com.cn/sales
    2. 没有找到您所需要的器件?请咨询我们的应用工程师。我们的专家会帮助您找到合适的器件,通常在一个工作日内回复。
    3. 型号尾缀:T或T&R = 卷带; + = RoHS/无铅; # = RoHS/无铅豁免权。详细信息请参考:完整的数据资料型号命名规则
    4. * “封装代码/变更”提供产品使用的变更信息。注意:型号尾缀中的“+”、“#”和“-”表示器件的RoHS状况,封装图上可能显示不同的尾缀字符。


    器件: 1-11 of 11

    DS2405 免费样品 采购
    封装: 类型 引脚 占位面积
      封装图编码/变更 *
    温度 RoHS/无铅?
    材料分析
    DS2405Z+T&R  
    ST223;3引脚;
    封装图: 21-0264 (PDF)
    使用封装码/变更:K3+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    DS2405Z+  
    ST223;3引脚;
    封装图: 21-0264 (PDF)
    使用封装码/变更:K3+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    DS2405Z  
    ST223;3引脚;
    封装图: 21-0264 (PDF)
    使用封装码/变更:K3-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    DS2405Z/T&R  
    ST223;3引脚;
    封装图: 21-0264 (PDF)
    使用封装码/变更:K3-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    DS2405/T&R  
    TO92;3引脚;
    封装图: 21-0250 (PDF)
    使用封装码/变更:Q3-4*
    -40°C至+85°C RoHS/无铅:
    材料分析
    DS2405+T&R  
    TO92;3引脚;
    封装图: 21-0250 (PDF)
    使用封装码/变更:Q3+4*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    DS2405+  
    TO92;3引脚;
    封装图: 21-0248 (PDF)
    使用封装码/变更:Q3+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    DS2405  
    TO92;3引脚;
    封装图: 21-0248 (PDF)
    使用封装码/变更:Q3-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    DS2405P/T&R  
    TSOC;6引脚;
    封装图: 21-0382 (PDF)
    使用封装码/变更:D6-1*
    -40°C至+85°C 参考数据资料
    材料分析
    DS2405P+  
    TSOC;6引脚;
    封装图: 21-0382 (PDF)
    使用封装码/变更:D6+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    DS2405P+T&R  
    TSOC;6引脚;
    封装图: 21-0382 (PDF)
    使用封装码/变更:D6+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析

    更多信息
  • 产品广告:下载

    没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    2007-07-12
    本页最后一次更新: 2008-05-09



          隐私权政策    法律声明

          © 2008 Maxim Integrated Products, Dallas Semiconductor版权所有