ENGLISH 简体中文 日本語 한국어  

MAX5141, MAX5142, MAX5143, MAX5144
+3V/+5V、串行输入、电压输出、14位DAC

超小尺寸14位DAC,采用µMAX封装,提供低功耗解决方案


  快速浏览     技术文档     定购信息     更多信息     所有内容  
概述
完整的数据资料 (PDF, 424kB)
英文 Download this datasheet in PDF format下载

The MAX5141—MAX5144 are serial-input, voltage-output, 14-bit digital-to-analog converters (DACs) in tiny µMAX® packages, 50% smaller than comparable DACs in an 8-pin SO. They operate from low +3V (MAX5143/MAX5144) or +5V (MAX5141/MAX5142) single supplies. They provide 14-bit performance (±1 LSB INL and DNL) over temperature without any adjustments. The DAC output is unbuffered, resulting in a low supply current of 120µA and a low offset error of 2 LSBs.

The DAC output range is 0V to VREF. For bipolar operation, matched scaling resistors are provided in the MAX5142/MAX5144 for use with an external precision op amp (such as the MAX400), generating a ±VREF output swing.

A 16-bit serial word is used to load data into the DAC latch. The 25MHz, 3-wire serial interface is compatible with SPI™/QSPI™/MICROWIRE™, and can interface directly with optocouplers for applications requiring isolation. A power-on reset circuit clears the DAC output to code 0 (MAX5141/MAX5143) or code 8192 (MAX5142/MAX5144) when power is initially applied.

A logic low on CLR-bar asynchronously clears the DAC output to code 0 (MAX5141/MAX5143) or code 8192 (MAX5142/MAX5144), independent of the serial interface.

The MAX5141/MAX5143 are available in 8-pin µMAX packages and the MAX5142/MAX5144 are available in 10-pin µMAX packages.

关键特性   应用/使用
  • Ultra-Small (3mm x 5mm) 8-Pin µMAX Package
  • Low 120µA Supply Current
  • Fast 1µs Settling Time
  • 25MHz SPI/QSPI/MICROWIRE-Compatible Serial Interface
  • VREF Range Extends to VDD
  • +5V (MAX5141/MAX5142) or +3V (MAX5143/MAX5144) Single-Supply Operation
  • Full 14-Bit Performance Without Adjustments
  • Unbuffered Voltage Output Directly Drives 60kΩ Loads
  • Power-On Reset Circuit Clears DAC Output to Code 0 (MAX5141/MAX5143) or Code 8192 (MAX5142/MAX5144)
  • Schmitt-Trigger Inputs for Direct Optocoupler Interface
  • Asynchronous active-low CLR

 
  • 自动测试设备(ATE)
  • 数据采集
  • 高分辨率与增益调节
  • 工业过程控制

    Key Specifications:   Digital-to-Analog Converters
    Part Number Number of Bits Number of Channels Interface Compatibility Typ. Settling Time (µs) Output Type Buffered Non-volatile (NV) Min. Single Supply (V) Max. Single Supply (V) RoHS Available Package Smallest Available Package (max w/pins) (mm2) Operating Temp. Range (°C) Price**
    MAX5141  14 1 Serial - SPI 1 Voltage No No 4.5 5.5 Yes uMAX/8 16 -40 to +85 $6.50 @ 1k
    MAX5142  4.5 5.5 uMAX/10 15 $6.50 @ 1k
    MAX5143  2.7 3.6 uMAX/8 16 $6.50 @ 1k
    MAX5144  2.7 3.6 uMAX/10 15 $6.50 @ 1k
    See All Digital-to-Analog Converters (248)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索 (English only)
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    参考文献: 19-1849; Rev. 1; 2001-12-21
    本页最后一次更新: 2007-06-14




             


          隐私权政策    法律声明

          © 2008 Maxim Integrated Products, Dallas Semiconductor版权所有


    ">