ENGLISH 简体中文 日本語 한국어  



   
 
请输入关键词或器件型号    



MAX8880, MAX8881
12V、超低IQ、低压差线性稳压器,带有POK


  快速浏览     技术文档     定购信息     更多信息     所有内容  
数据资料
完整的数据资料 (PDF, 236kB)
英文 下载数据资料(PDF)下载 英文 下载数据资料(PDF)打开新页面

概述
The MAX8880/MAX8881 are ultra-low supply current, low-dropout linear regulators, capable of delivering up to 200mA. They are designed for battery-powered applications where reverse battery protection and long battery life are critical.

These regulators' low 3.5µA supply current extends battery life in applications with long standby periods. Unlike PNP-based designs, a 2Ω PMOS device maintains ultra-low supply current throughout the entire operating range and in dropout. The parts are internally protected from output short circuits, reverse battery connection, and thermal overload. An internal power-OK (POK) comparator indicates when the output is out of regulation.

The MAX8880 output is adjustable from 1.25V to 5V using an external resistor-divider. The MAX8881 provides only factory-preset output voltages of 1.8V, 2.5V, 3.3V, or 5V (see Ordering Information in the full data sheet). The devices are available in 6-pin SOT23 and 6-pin TDFN packages.

关键特性   应用/使用
  • 3.5µA Supply Current at 12V
  • Reverse Battery Protection
  • 2.5V to 12V Input Voltage Range
  • ±1.5% Output Voltage Accuracy
  • 200mA max Output Current
  • 2Ω PMOS Output Device
  • Short-Circuit and Thermal Overload Protection
  • POK Output for Out-of-Regulation Indicator
  • Fixed 1.8V, 2.5V, 3.3V, and 5V (MAX8881)
    Adjustable from 1.25V to 5V (MAX8880)
  • Tiny 6-Pin SOT23 Package
  • Thin 6-Pin TDFN Package

 
  • 电池供电报警
  • CMOS备用电源
  • 手持终端
  • PDA
  • 实时时钟
  • 远端发送器
  • 智能电池组/充电器
  • 烟雾检测器

    Key Specifications:   Linear Regulators
    Part Number Regulators per Pkg. Min. VIN (V) Max. VIN (V) Preset VOUT (V) Min. Adjustable VOUT (V) Max. Adjustable VOUT (V) Typ. VDROPOUT@ Rated ILOAD (V) Rated ILOAD (mA) Max. ICC (µA) Low Battery/ Power Fail Output Nominal POK/Reset Threshold (V) Watchdog Reverse Battery Protection Package Smallest Available Package (max w/pins) (mm2) Operating Temp. Range (°C) Price**
    MAX8880  1 2.5 12  -  1.25 5 0.36 200 10 No Vout-9.5% No Yes SOT/6
    TDFN-EP/6
    9 -40 to +85 $0.86 @ 1k
    MAX8881  1.8
    2.5
    3.3
    5.0
     -   -  SOT/6 $0.86 @ 1k
    See All Linear Regulators (145)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    图表
    MAX8880、MAX8881:典型工作电路
    典型工作电路

    应用笔记
  • App Note 898: Selecting LDO Linear Regulators for Cellphone Designs - MAX8880, MAX8881 (English only)
  • App Note 1845: Choosing the Right DC-DC Converter for Automotive Applications - MAX8881 (English only)
  • App Note 2047: Step-Up/Step-Down Converter Features Ultra-Low Quiescent Current - MAX8880 (English only)
  • 应用笔记3241:通过USB为电池充电 - MAX8881
  • App Note 3874: Simple Characterization Circuit for Rechargeable AA Cells - MAX8881 (English only)

    评估板

    设计指南
  • 电源 (PDF)
  • 电池供电产品的电源管理方案 (PDF)

    可靠性报告
  • 可靠性报告: MAX8881.pdf (English only)
  • 查询FIT数据:
  • 申请可靠性报告: (English only)

    软件/模型

    定购信息
    注:

    1. 购买产品,请访问:http://www.maxim-ic.com.cn/sales
    2. 没有找到您所需要的器件?请咨询我们的应用工程师。我们的专家会帮助您找到合适的器件,通常在一个工作日内回复。
    3. 型号尾缀:T或T&R = 卷带; + = RoHS/无铅; # = RoHS/无铅豁免权。详细信息请参考:完整的数据资料型号命名规则
    4. * “封装代码/变更”提供产品使用的变更信息。注意:型号尾缀中的“+”、“#”和“-”表示器件的RoHS状况,封装图上可能显示不同的尾缀字符。


    器件: 1-26 of 26

    MAX8880 免费样品 采购
    封装: 类型 引脚 占位面积
      封装图编码/变更 *
    温度 RoHS/无铅?
    材料分析
    MAX8880EUT/V+  
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN+1*
    -40°C至+85°C 参考数据资料
    材料分析
    MAX8880EUT/V+T    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN+1*
    -40°C至+85°C 参考数据资料
    材料分析
    MAX8880EUT    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX8880EUT+  
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX8880EUT-T    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX8880EUT+T    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX8880ETT  
    TDFN-EP;6引脚;10mm²
    封装图: 21-0137 (PDF)
    Land Pattern: 90-0058 (PDF)
    使用封装码/变更:T633-2*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX8880ETT+  
    TDFN-EP;6引脚;10mm²
    封装图: 21-0137 (PDF)
    Land Pattern: 90-0058 (PDF)
    使用封装码/变更:T633+2*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX8880ETT-T    
    TDFN-EP;6引脚;10mm²
    封装图: 21-0137 (PDF)
    Land Pattern: 90-0058 (PDF)
    使用封装码/变更:T633-2*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX8880ETT+T    
    TDFN-EP;6引脚;10mm²
    封装图: 21-0137 (PDF)
    Land Pattern: 90-0058 (PDF)
    使用封装码/变更:T633+2*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX8881 免费样品 采购
    封装: 类型 引脚 占位面积
      封装图编码/变更 *
    温度 RoHS/无铅?
    材料分析
    MAX8881EUT18+  
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX8881EUT18  
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX8881EUT25+  
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX8881EUT25  
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX8881EUT33+  
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX8881EUT33    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX8881EUT50+  
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX8881EUT50    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX8881EUT18-T    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX8881EUT25-T    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX8881EUT33-T    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX8881EUT50-T    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX8881EUT33+T    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX8881EUT18+T    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX8881EUT25+T    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX8881EUT50+T    
    SOT;6引脚;9mm²
    封装图: 21-0058 (PDF)
    Land Pattern: 90-0175 (PDF)
    使用封装码/变更:U6SN+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析

    更多信息
  • 顶标: MAX8880 MAX8881
  • 新品发布 2000-11-13  (English only)

    没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    参考文献: 19-1679; Rev. 2; 2008-01-16
    本页最后一次更新: 2008-03-12


            •         •         •     隐私权政策     •     法律声明

        © 2009 Maxim Integrated Products版权所有