ENGLISH 简体中文 日本語 한국어  

MAX5264
八通道、14位、电压输出DAC,并行接口,用于ATE


  快速浏览     技术文档     定购信息     更多信息     所有内容  
概述
完整的数据资料 (PDF, 464kB)
英文 Download this datasheet in PDF format下载

The MAX5264 contains eight 14-bit, voltage-output digital-to-analog converters (DACs). On-chip precision output amplifiers provide the voltage outputs. The device operates from +14V/-9V supplies. Its bipolar output voltage swing ranges from +9V to -4V and is achieved with no external components. The MAX5264 has three pairs of differential reference inputs; two of these pairs are connected to two DACs each, and a third pair is connected to four DACs. The references are independently controlled, providing different full-scale output voltages to the respective DACs. The MAX5264 operates within the following voltage ranges: VDD = +7V to +14V, VSS = -5V to -9V, and VCC = +4.75V to +5.25V.

The MAX5264 features double-buffered interface logic with a 14-bit parallel data bus. Each DAC has an input latch and a DAC latch. Data in the DAC latch sets the output voltage. The eight input latches are addressed with three address lines. Data is loaded to the input latch with a single write instruction. An asynchronous load input (active-low LD) transfers data from the input latch to the DAC latch. The active-low LD input controls all DACs; therefore, all DACs can be updated simultaneously by asserting the active-low LD pin. An asynchronous active-low CLR input sets the output of all eight DACs to the respective DUTGND input of the op amp. Note that active-low CLR is a CMOS input, which is powered by VDD. All other logic inputs are TTL/CMOS compatible. The "A" grade of the MAX5264 has a maximum INL of ±4LSBs, while the "B" grade has a maximum INL of ±8LSBs. Both grades are available in 44-pin MQFP packages.

关键特性   应用/使用
  • Full 14-Bit Performance Without Adjustments
  • 8 DACs in a Single Package
  • Buffered Voltage Outputs
  • Unipolar or Bipolar Voltage Swing to +9V and -4V
  • 22µs Output Settling Time
  • Drives Up to 10,000pF Capacitive Load
  • Low Output Glitch: 30mV
  • Low Power Consumption: 10mA (typ)
  • Small 44-Pin MQFP Package
  • Double-Buffered Digital Inputs
  • Asynchronous Load Updates All DACs Simultaneously
  • Asynchronous CLR-bar Forces All DACs to DUTGND Potential

 
  • 任意函数发生器
  • 自动测试设备(ATE)
  • 航空电子与军用系统
  • 数字增益与失调控制
  • 工业过程控制
  • 元件数最少的模拟系统
  • SONET应用

    Key Specifications:   Digital-to-Analog Converters
    Part Number Number of Bits Number of Channels Interface Compatibility Typ. Settling Time (µs) Output Type Buffered Non-volatile (NV) Multiple Supplies (V) Package Operating Temp. Range (°C)
    MAX5264  14 8 Parallel - Full Word 22 Voltage Yes No -5 to -9, +7 to +14 MQFP/44 0 to +70
    See All Digital-to-Analog Converters (250)

    图表
    MAX5264:功能原理框图
    功能原理框图

    没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    参考文献: 19-1734; Rev. 0; 2000-08-10
    本页最后一次更新: 2008-09-05



          隐私权政策    法律声明

          © 2008 Maxim Integrated Products, Dallas Semiconductor版权所有