The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers' inputs have fault thresholds that detect when the part is not in a valid state.
The MAX3097E/MAX3098E indicate when a receiver input is in an open-circuit condition, short-circuit condition, or outside the common-mode range. They also generate a fault indication when the differential input voltage goes below a preset threshold. See Ordering Information or the Electrical Characteristics for threshold values.
The fault circuitry includes a capacitor-programmable delay to ensure that there are no erroneous fault conditions even at slow edge rates. Each receiver is capable of accepting data at rates up to 32Mbps.
关键特性
应用/使用
Detects the Following RS-485 Faults:
Open-Circuit Condition
Short-Circuit Condition
Low Differential Voltage Signal
Common-Mode Range Violation
ESD Protection
±15kV—Human Body Model
±15kV—IEC 1000-4-2, Air-Gap Discharge Method
±8kV—IEC 1000-4-2, Contact Discharge Method
Single +3V to +5.5V Operation
-10V to +13.2V Extended Common-Mode Range
Capacitor-Programmable Delay of Fault Indication
Allows Error-Free Operation at Slow Data Rates
Independent and Universal Fault Outputs
32Mbps Data Rate
16-Pin QSOP is 40% Smaller than Industry-Standard 26LS31/32 Solutions
嵌入式系统
高速、三路RS-485/RS-422接收器，具有增强型ESD保护功能
用于电机轴编码器的RS-485/RS-422接收器
电信
具有输入故障指示的三路RS-485/RS-422接收器
Key Specifications:
RS-422/485 Line Driver/Receivers
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
下载
