ENGLISH 简体中文 日本語 한국어  

MAX4271, MAX4272, MAX4273
3V至12V、限流型、热插拔控制器,带有自动重试以及DualSpeed/BiLevel故障保护

3V至12V热插拔控制器,提供闭锁保护或自动重试功能,8引脚SO封装


  快速浏览     技术文档     定购信息     更多信息     所有内容  
概述
完整的数据资料 (PDF, 416kB)
英文 Download this datasheet in PDF format下载

The MAX4271/MAX4272/MAX4273 comprise a complete family of integrated 3V to 12V hot-swap controllers. They allow the safe insertion and removal of circuit cards into live backplanes.

The discharged filter capacitors of the circuit card provide a low impedance to the live backplane. High in-rush currents from the backplane to the circuit card can burn up connectors and components, or momentarily collapse the backplane power supply leading to a system reset. This family of hot-swap controllers prevents such problems by regulating the current to a preset limit when the board is plugged in, allowing the system to stabilize safely. After the startup cycle is completed, two on-chip comparators provide DualSpeed/BiLevel™ protection against short circuits, load glitches, and overcurrent conditions. In the event of a fault condition, the load is disconnected. Fault recovery is handled by unlatching (MAX4271), autoretry (MAX4272), or programmed (MAX4273) methods.

The MAX4271 family includes many integrated features that reduce component count and design time. An on-board charge pump provides the gate drive for a low-cost, external n-FET. Integrated features like startup current regulation and current glitch protection eliminate external timing resistors and capacitors. Also featured are an open-drain status output to indicate a fault condition, and an adjustable overcurrent response time.

The MAX4271 (latched fault protection) and MAX4272 (autoretry fault protection) come in 8-pin SO packages. The MAX4273 (full function) comes in the space-saving 16-pin QSOP package and 16-pin SO package. All parts are specified across the extended temperature range, and have an absolute maximum rating of 15V to provide extra protection against inductive kickback during board removal.

关键特性   应用/使用
  • Provide Safe Hot Swap for +3V to +12V Power Supplies with Few External Components
  • Unique Current Regulation Architecture Minimizes n-FET Linear Mode Duration
  • Autoretry Feature (MAX4272/MAX4273)
  • DualSpeed/BiLevel Current Limit Protects Against Current Glitches and Short Circuits
  • Power-On RESET (MAX4273)
  • 15V Absolute Maximum Rating Protects Against Inductive Kickbacks During Board Removal
  • Internal Charge Pump Generates Gate Drive for External n-MOSFET
  • Status Output Pin Indicates Fault/Safe Condition
  • Space-Saving 8-Pin SO, 16-Pin QSOP Packages

 
  • PBX
  • RAID
  • 路由器/交换机
  • 路由器/交换机
  • 电信
  • 无线基站

    Key Specifications:   Hot Swap Controllers
    Part Number Min. VIN (V) Max. VIN (V) Low Voltage High Voltage Voltage Polarity Type Fault Condition Control Number of Channels Features RoHS Available Package Operating Temp. Range (°C) Price**
    MAX4271  2.7 13.2 Yes No Positive Positive, Low-Voltage Latched Off 1
    On/Off and STAT Control
    Regulated, DualSpeed/BiLevel; inrush current and short circuit protection
    Yes SOIC/8 -40 to +85 $1.95 @ 1k
    MAX4272  Periodic retry
    On/Off and STAT Control
    Regulated, DualSpeed/BiLevel; inrush current and short circuit protection
    SOIC/8 $2.04 @ 1k
    MAX4273  Programmable latched off or periodic retry
    On/Off, STAT, and POR Controls
    Regulated, DualSpeed/BiLevel; inrush current and short circuit protection
    QSOP/16
    SOIC/16
    $2.28 @ 1k
    See All Hot Swap Controllers (45)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    图表
    MAX4271,MAX4272,MAX4273:典型工作电路
    典型工作电路

    没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    参考文献: 19-1694; Rev. 2; 2007-12-20
    本页最后一次更新: 2007-12-20



          隐私权政策    法律声明

          © 2008 Maxim Integrated Products, Dallas Semiconductor版权所有