ENGLISH 简体中文 日本語 한국어  

MAX5839, MAX5839A, MAX5839B
八通道、13位、电压输出DAC,并行接口


  快速浏览     技术文档     定购信息     更多信息     所有内容  
概述
完整的数据资料 (PDF, 224kB)
英文 Download this datasheet in PDF format下载

The MAX5839 contains eight 13-bit, voltage-output digital-to-analog converters (DACs). On-chip precision output amplifiers provide the voltage outputs. The device operates from +14V/-9V supplies. Its bipolar output voltage swing ranges from +9V to -4V and is achieved with no external components. The MAX5839 has three pairs of differential reference inputs; two of these pairs are connected to two DACs each, and a third pair is connected to four DACs. The references are independently controlled, providing different full-scale output voltages to the respective DACs. The MAX5839 operates within the following voltage ranges: VDD = +7V to +14V, VSS = -5V to -9V, and VCC = +4.75V to +5.25V.

The MAX5839 features double-buffered interface logic with a 13-bit parallel data bus. Each DAC has an input latch and a DAC latch. Data in the DAC latch sets the output voltage. The eight input latches are addressed with three address lines. Data is loaded to the input latch with a single write instruction. An asynchronous load input (active-low LD) transfers data from the input latch to the DAC latch. The active-low LD input controls all DACs; therefore, all DACs can be updated simultaneously by asserting the active-low LD pin.

An asynchronous active-low CLR input sets the output of all eight DACs to the respective DUTGND input of the op amp. Note that active-low CLR is a CMOS input, which is powered by VDD. All other logic inputs are TTL/CMOS compatible.

The "A" grade of the MAX5839 has a maximum INL of ±2 LSBs, while the "B" grade has a maximum INL of ±4 LSBs. Both grades are available in 44-pin MQFP packages.

关键特性   应用/使用
  • Full 13-Bit Performance Without Adjustments
  • 8 DACs in a Single Package
  • Buffered Voltage Outputs
  • Unipolar or Bipolar Voltage Swing to +9V and -4V
  • 22µs Output Settling Time
  • Drives up to 10,000pF Capacitive Load
  • Low Output Glitch: 30mV
  • Low Power Consumption: 10mA (typ)
  • Small Package: 44-Pin MQFP
  • Double-Buffered Digital Inputs
  • Asynchronous Load Updates All DACs Simultaneously
  • Asynchronous active-low CLR Forces All DACs to DUTGND Potential

 
  • 任意函数发生器
  • 自动测试设备(ATE)
  • 航空电子与军用系统
  • 数字增益与失调控制
  • 工业过程控制
  • 元件数最少的模拟系统
  • SONET应用

    Key Specifications:   Digital-to-Analog Converters
    Part Number Number of Bits Number of Channels Interface Compatibility Typ. Settling Time (µs) Output Type Buffered Non-volatile (NV) Multiple Supplies (V) Package Smallest Available Package (max w/pins) (mm2) Operating Temp. Range (°C) Price**
    MAX5839  13 8 Parallel - Full Word 22 Voltage Yes No -5 to -9, +5, +7 to +14 MQFP/44 181 -40 to +85
    0 to +70
    $22.50 @ 1k
    See All Digital-to-Analog Converters (250)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    参考文献: 19-1603; Rev. 0; 2000-03-10
    本页最后一次更新: 2007-06-12



          隐私权政策    法律声明

          © 2008 Maxim Integrated Products, Dallas Semiconductor版权所有


    ">