The MAX3665 low-power transimpedance preamplifier
for 622Mbps SDH/SONET applications consumes only
70mW at VCC = 3.3V. Operating from a single +3.3V or
+5.0V supply, it converts a small photodiode current to a
measurable differential voltage. A DC cancellation circuit
provides a true differential output swing over a wide
range of input current levels, thus reducing pulse-width
distortion. The differential outputs are back-terminated
with 50Ω per side.
The overall transimpedance gain is nominally 8kΩ. For
input signal levels beyond approximately 50µAp-p, the
amplifier will limit the output swing to 250mV. The
MAX3665's low 55nA input noise provides a typical
sensitivity of -33.2dBm in 1300nm, 622Mbps receivers.
The MAX3665 is designed to be used in conjunction
with the MAX3676 clock recovery and data retiming IC
with limiting amplifier. Together they form a complete
3.3V or 5.0V 622Mbps SDH/SONET receiver.
In die form, the MAX3665 is designed to fit on a header
with a PIN diode. It includes a filter connection that provides
positive bias for the photodiode through a 1.5kΩ resistor to VCC. The device is available in an 8-pin
µMAX® package.
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
下载
