ENGLISH 简体中文 日本語 한국어  

MAX1693, MAX1693H, MAX1694
USB限流型开关,带有故障屏蔽

单通道USB限流开关,带有故障屏蔽,采用µMAX封装


  快速浏览     技术文档     定购信息     更多信息     所有内容  
概述
完整的数据资料 (PDF, 256kB)
英文 Download this datasheet in PDF format下载

The MAX1693/(MAX1693H)/MAX1694 are current-limited, 60mΩ switches with built-in fault blanking. Their accurate preset current limit of 0.7A to 1.0A makes them ideally suited for USB applications. Their low quiescent supply current (14µA) and shutdown current (1µA) conserve battery power in portable applications. The MAX1693/(MAX1693H)/MAX1694 operate with inputs from +2.7V to +5.5V, making them ideal for both +3V and +5V systems.

A fault signal notifies the microprocessor that the internal current limit has been reached. A 10ms fault-blanking feature allows momentary faults (such as those caused when hot-swapping into a capacitive load) to be ignored, thus preventing false alarms to the host system. This fault blanking also prevents a fault signal from being issued when the device is powering up.

In the MAX1693/(MAX1693H), an output overcurrent condition causes the switch to current limit at 0.7A to 1.0A and active-low FAULT to go low after the 10ms blanking period. When the overcurrent condition is removed, active-low FAULT returns to its high-impedance state. In the MAX1694, any overcurrent longer than 10ms will latch the switch open and set active-low FAULT low. The latch is cleared by cycling the active-low ON input or by powering up the device again. This feature saves power by preventing the device from thermally cycling on and off in case of a persistent short-circuit condition.

The MAX1693/(MAX1693H)/MAX1694 have several safety features to ensure that the USB port is protected. Built-in thermal-overload protection limits power dissipation and junction temperatures. Both devices have accurate internal current-limiting circuitry to protect the input supply against overload. They are available in space-saving 10-pin µMAX® packages.

关键特性   应用/使用
  • Accurate Current Limit (0.7A min, 1.0A max)
  • Guaranteed 0.75A Short-Circuit Protection
  • 10ms Internal Fault-Blanking Timeout
  • No Fault Signal During Power-Up
  • Latched active-low FAULT Output Turns Off Power Switch (MAX1694)
  • Thermal Shutdown Protection
  • +2.7V to +5.5V Supply Range
  • 14µA Supply Current
  • Small 10-Pin µMAX Package
  • UL Approved - #E197531
  • 通过美国保险商实验室协会(UL®)认证

 
  • 电池充电器
  • 坞站
  • 热插拔供电
  • 笔记本电脑
  • 便携式设备
  • USB端口和集线器

    Key Specifications:   USB Power Switches
    Part Number Functions Number of Switches Max. Load Current (A) RON (typ) (Ω) Fault Indicator Fault Blanking Timeout (ms) Switch Op. Voltage Range (V) Package Operating Temp. Range (°C) Price**
    MAX1693 
    Fault Blanking
    1 0.85 0.06 Yes 10 2.7 to 5.5 uMAX/10 -40 to +85 $0.80 @ 1k
    MAX1694  $0.80 @ 1k
    See All USB Power Switches (28)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    图表
    MAX1693,MAX1693H,MAX1694:典型工作电路
    典型工作电路

    没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    参考文献: 19-1518; Rev. 2; 2002-02-22
    本页最后一次更新: 2007-06-04



          隐私权政策    法律声明

          © 2008 Maxim Integrated Products, Dallas Semiconductor版权所有