快速浏览

技术文档

定购信息

更多信息

所有内容

概述

完整的数据资料 (PDF, 480kB) 英文 下载 The MAX3140 is a complete universal asynchronous receiver-transmitter (UART) and a true fail-safe RS-485/RS-422 transceiver combined in a single 28-pin QSOP package for space-, cost-, and power-constrained applications. The MAX3140 saves additional board space as well as microcontroller (µC) I/O pins by featuring an SPI™/QSPI™/MICROWIRE™-compatible serial interface. It is pin-programmable for configuration in all RS-485/RS-422 networks. The MAX3140 includes a single RS-485/RS-422 driver and receiver featuring true fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This feature provides immunity to faults without requiring complex termination. The MAX3140 provides software-selectable control of half- or full-duplex operation, data rate, slew rate, and transmitter and receiver phase. The RS-485 driver slew rate is programmable to minimize EMI and results in maximum data rates of 115kbps, 500kbps, and 10Mbps. Independent transmitter/receiver phase control enables software correction of twisted-pair polarity reversal. A 1/8-unit-load receiver input impedance allows up to 256 transceivers on the bus. The MAX3140's UART includes an oscillator circuit derived from an external crystal, and a baud-rate generator with software-programmable divider ratios for all common baud rates from 300 baud to 230k baud. The UART features an 8-word-deep receive FIFO that minimizes processor overhead and provides a flexible interrupt with four maskable sources, including address recognition on 9-bit networks. Two control lines are included for hardware handshaking-one input and one output. The MAX3140 operates from a single +5V supply and typically consumes only 645µA with the receiver active. Hardware-invoked shutdown reduces supply current to only 20µA. The UART and RS-485/RS-422 functions can be used together or independently since the two functions share only supply and ground connections (the MAX3140 is hardware- and software-compatible with the MAX3100 and MAX3089).

关键特性		应用/使用
Integrated UART and RS-485/RS-422 Transceiver in a Single 28-Pin QSOP SPI/MICROWIRE-Compatible Interface Saves µC I/O Pins True Fail-Safe Receiver Output Eliminates Complex Network Termination Pin-Programmable RS-485/RS-422 Features Half/Full-Duplex Operation Slew-Rate Limiting for Reduced EMI 115kbps/500kbps/10Mbps Data Rates Receiver/Transmitter Phase for Twisted-Pair Polarity Reversal Full-Featured UART Programmable Up to 230k baud with a 3.6864MHz Crystal 8-Word Receive FIFO Minimizes Processor Overhead 9-Bit Address-Recognition Interrupt Allows Up to 256 Transceivers on the Bus Low 20µA Hardware Shutdown Mode Hardware/Software-Compatible with MAX3100 and MAX3089		嵌入式系统 HVAC与楼宇控制 工业控制局域网 智能仪表 销售终端机(POS)设备 用于EMI敏感应用的收发器

图表

典型应用电路

没有找到你需要的产品吗？

应用工程师帮助选型，下个工作日回复 参数搜索 应用帮助

快速浏览

技术文档

定购信息

更多信息

概述   关键特性   应用/使用   关键指标   图表

数据资料   应用笔记   设计指南   工程期刊   可靠性报告   软件/模型   评估板

价格与供货   样品   在线订购   封装信息   无铅信息

相关产品   注释、注解   评估板