MAX1400 +5V、18位、低功耗、多通道、过采样(Σ-Δ) ADC

快速浏览

技术文档

定购信息

更多信息

所有内容

概述

完整的数据资料 (PDF, 504kB)
英文

下载

The MAX1400 18-bit, low-power, multichannel, serial-output ADC uses a sigma-delta modulator with a digital decimation filter to achieve true 16-bit accuracy. The user-selectable decimation factor of the digital filter allows the conversion resolution to be reduced in exchange for a higher output data rate. The device achieves true 16-bit performance at an output data rate of up to 480sps. In addition, the modulator sampling frequency may be optimized for either lowest power dissipation or highest throughput rate. The MAX1400 operates from +5V.

This device offers three fully differential input channels that can be independently programmed with a gain between +1V/V and +128V/V. Furthermore, it can compensate an input-referred DC offset (such as system offset) up to 117% of the selected full-scale range. These three differential channels may also be configured to operate as five pseudo-differential input channels. Two additional, fully differential system-calibration channels are provided for gain and offset error correction. External access is provided to the multiplexer (mux) output to facilitate additional signal processing.

The MAX1400 can be configured to scan all signal inputs sequentially and provide the results through the serial interface with minimum communications overhead. When used with a 2.4576MHz or 1.024MHz master clock, the digital decimation filter can be programmed to produce zeros in its frequency response at the line frequency and associated harmonics, ensuring excellent line rejection without the need for further post-filtering.

The MAX1400 comes in a 28-pin SSOP package.

关键特性

应用/使用

18-Bit Resolution, Sigma-Delta ADC
16-Bit Performance with No Missing Codes to 480sps
Low Quiescent Current
- 250µA (operating mode)
- 2µA (power-down mode)
3 Fully Differential or 5 Pseudo-Differential Signal Input Channels
2 Additional Fully Differential Calibration Channels/Auxiliary Input Channels
Access to the Mux Output/ADC Input
Programmable Gain and Offset
Fully Differential Reference Inputs
Converts Continuously or On Command
Automatic Channel Scanning and Continuous Data Output Mode
Operates with +5V Analog Supply and +3V or +5V Digital Supply
SPI™/QSPI™-Compatible 3-Wire Serial Interface
28-Pin SSOP Package

	环路供电系统
	便携式工业仪表
	便携式称重仪
	压力传感器与变送器

Key Specifications: Sigma-Delta ADCs

Part Number

Resolution (Bits)

Max. DNL (LSB)

Max. INL (±%FSR)

Conversion Rate (sps)

Max. Conversion Time (µs)

Typ. Supply Current (mA)

Standby Mode

Ref. (V)

Low Power

Special Features

Supply Voltage (V)

Data Bus Interface

EV-Kit

Input Channels

RoHS Available

Package

Smallest Available Package (max w/pins) (mm²)

Operating Temp. Range (°C)

Price^**

MAX1400

0.0015

4,800

205

0.25

Yes

Ext

Yes

Differential Inputs Unipolar/Bipolar Included PGA

Serial

Yes

SSOP/28

-40 to +85
0 to +70

$8.95 @ 1k

See All Sigma-Delta ADCs (12)

Notes:
^**This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.