ENGLISH 简体中文 日本語 한국어  

MAX668, MAX669
1.8V至28V输入、PWM升压型控制器,µMAX封装

灵活的转换架构提供升压、SEPIC、反激或隔离拓扑,MAX668输出电压仅受外部元件额定值的限制


  快速浏览     技术文档     定购信息     更多信息     所有内容  
数据资料
完整的数据资料 (PDF, 304kB)
英文 Download this datasheet in PDF format下载

概述
The MAX668/MAX669 constant-frequency, pulse-width modulating (PWM), current-mode DC-DC controllers are designed for a wide range of DC-DC conversion applications including step-up, SEPIC, flyback, and isolated-output configurations. Power levels of 20W or more can be controlled with conversion efficiencies of over 90%. The 1.8V to 28V input voltage range supports a wide range of battery and AC-powered inputs. An advanced BiCMOS design features low operating current (220µA), adjustable operating frequency (100kHz to 500kHz), soft-start, and a SYNC input allowing the MAX668/MAX669 oscillator to be locked to an external clock.

DC-DC conversion efficiency is optimized with a low 100mV current-sense voltage as well as with Maxim's proprietary Idle Mode™ control scheme. The controller operates in PWM mode at medium and heavy loads for lowest noise and optimum efficiency, then pulses only as needed (with reduced inductor current) to reduce oper-ating current and maximize efficiency under light loads. A logic-level shutdown input is also included, reducing supply current to 3.5µA.

The MAX669, optimized for low input voltages with a guaranteed start-up voltage of 1.8V, requires boot-strapped operation (IC powered from boosted output). It supports output voltages up to 28V. The MAX668 operates with inputs as low as 3V and can be connected in either a bootstrapped or non-bootstrapped (IC powered from input supply or other source) configuration. When not bootstrapped, it has no restriction on output voltage. Both ICs are available in an extremely compact 10-pin µMAX® package.

关键特性   应用/使用
  • 1.8V Minimum Start-Up Voltage (MAX669)
  • Wide Input Voltage Range (1.8V to 28V)
  • Tiny 10-Pin µMAX Package
  • Current-Mode PWM and Idle Mode™ Operation
  • Efficiency Over 90%
  • Adjustable 100kHz to 500kHz Oscillator or SYNC Input
  • 220µA Quiescent Current
  • Logic-Level Shutdown
  • Soft-Start

 
  • 音频系统
  • LAN与网络系统
  • POS系统
  • 电信硬件

    Key Specifications:   Step-Up Switching Regulators
    Part Number VIN (min) (V) VIN (max) (V) Min. VOUT (V) Max. VOUT (V) IOUT (A) IOUT (A) Output Adj. Method Operating Current, ICC (max) (mA) Number of DC-DC Outputs Operating Freq. (kHz) Package Price**
    MAX668  3 28 3 100 6 6 Resistor 0.22 1 500 uMAX/10 $2.10 @ 1k
    MAX669  1.8 28 $2.10 @ 1k
    See All Step-Up Switching Regulators (89)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    图表
    MAX668,MAX669:典型工作电路
    典型工作电路

    应用笔记
  • App Note 294: Dual-Output SLIC Supply Shares Feedback - MAX668 (English only)
  • App Note 296: 3.3V Supply Taps Power from the -12V PCI Bus - MAX668 (English only)
  • App Note 433: 5V Input Converter Generates -30V at 80mA - MAX668 (English only)
  • App Note 435: +12V Input Converter Generates -165V at 100mA - MAX668 (English only)
  • App Note 436: Extending Soft-Start - MAX668 (English only)
  • App Note 471: Step-up Converter with LDO Beats SEPIC Efficiency - MAX668 (English only)
  • App Note 529: 15V Input Converter Generates -185V at 50mA - MAX668 (English only)
  • App Note 716: Proper Layout and Component Selection Controls EMI - MAX668 (English only)
  • App Note 735: Layout Considerations for Non-Isolated DC-DC Converters - MAX668 (English only)
  • App Note 904: SLIC Power-Supply Design - MAX668 (English only)
  • App Note 907: R-C Snubbing for the Lab - MAX668 (English only)
  • App Note 910: High-Efficiency Boost Converter Provides 24V for DTE - MAX668 (English only)
  • App Note 911: High-Efficiency Boost Converter Provides 48V for IP Phones - MAX668 (English only)
  • App Note 945: Step-Up Controller Forms Negative Step-Down Regulator - MAX668 (English only)
  • App Note 1109: Small, High-Voltage Boost Converters - MAX668 (English only)
  • App Note 1115: Isolated SLIC Supply - MAX668 (English only)
  • App Note 1161: Current Limited DC-DC Controller Used as Step-Up Step-Down SEPIC Power Supply for USB Devices - MAX668 (English only)
  • App Note 2031: DC-DC Converter Tutorial - MAX668 (English only)
  • 应用笔记2631:从PCI总线的-12V电压获得3.3V电压 - MAX668
  • 应用笔记3773:数码相机升/降压电源设计 - MAX669
  • App Note 3843: ±15V Switch-Mode Power Supply Has Wide Input-Voltage Range - MAX668 (English only)
  • App Note 3943: ±15V or ±12V Output Switch-Mode Power Supply Has Wide Input-Voltage Range - MAX668 (English only)

    评估板
  • MAX668EVKIT

    设计指南
  • 电源 (PDF)

    可靠性报告
  • 查询FIT数据:
  • 可靠性报告: MAX668EUB.pdf (English only)
  • 申请可靠性报告: (English only)

    软件/模型

    定购信息
    注:

    1. 购买产品,请访问:http://www.maxim-ic.com.cn/sales
    2. 没有找到您所需要的器件?请咨询我们的应用工程师。我们的专家会帮助您找到合适的器件,通常在一个工作日内回复。
    3. 型号尾缀:T或T&R = 卷带; + = RoHS/无铅; # = RoHS/无铅豁免权。详细信息请参考:完整的数据资料型号命名规则
    4. * “封装代码/变更”提供产品使用的变更信息。注意:型号尾缀中的“+”、“#”和“-”表示器件的RoHS状况,封装图上可能显示不同的尾缀字符。


    器件: 1-8 of 8

    MAX668 免费样品 采购
    封装: 类型 引脚 占位面积
      封装图编码/变更 *
    温度 RoHS/无铅?
    材料分析
    MAX668EUB  
    uMAX;10引脚;
    封装图: 21-0061 (PDF)
    使用封装码/变更:U10-2*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX668EUB-T  
    uMAX;10引脚;
    封装图: 21-0061 (PDF)
    使用封装码/变更:U10-2*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX668EUB+  
    uMAX;10引脚;
    封装图: 21-0061 (PDF)
    使用封装码/变更:U10+2*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX668EUB+T  
    uMAX;10引脚;
    封装图: 21-0061 (PDF)
    使用封装码/变更:U10+2*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX669 免费样品 采购
    封装: 类型 引脚 占位面积
      封装图编码/变更 *
    温度 RoHS/无铅?
    材料分析
    MAX669EUB  
    uMAX;10引脚;
    封装图: 21-0061 (PDF)
    使用封装码/变更:U10-2*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX669EUB-T  
    uMAX;10引脚;
    封装图: 21-0061 (PDF)
    使用封装码/变更:U10-2*
    -40°C至+85°C RoHS/无铅:
    材料分析
    MAX669EUB+  
    uMAX;10引脚;
    封装图: 21-0061 (PDF)
    使用封装码/变更:U10+2*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    MAX669EUB+T  
    uMAX;10引脚;
    封装图: 21-0061 (PDF)
    使用封装码/变更:U10+2*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析

    注释、注解
    • 1.8V to 28V input voltage range, PWM step-up converter

    更多信息
  • MAX668, MAX668,MAX8867, MAX669电源设计手册

    没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    参考文献: 19-4778; Rev. 1; 2002-10-10
    本页最后一次更新: 2007-06-01



          隐私权政策    法律声明

          © 2008 Maxim Integrated Products, Dallas Semiconductor版权所有