The MAX881R low-noise, inverting power supply is designed for biasing GaAsFET power amplifiers in portable wireless applications. This device is a chargepump inverter followed by a negative linear regulator. The input voltage range is 2.5V to 5.5V. The output is preset at -2.0V or can be set, using two resistors, to any voltage from -0.5V to (-VIN + 0.6V). It can deliver up to 4mA. The internal linear regulator also filters the output to 1mVP-P ripple and noise.
Other features include a power-OK (active-low POK) output that signals when the negative voltage is within 7.5% of its set point. It protects the GaAsFET by not allowing power to be applied to the GaAsFET's drain until it is properly biased. The signal can be routed either to a microcontroller or directly to a switch at the GaAsFET drain. The MAX881R is available in a 10-pin µMAX® package.
关键特性
应用/使用
Small µMAX Package
1mVP-P Output Voltage Ripple and Noise
Power-OK Signal to Control GaAsFET Drain Switch
0.05µA Logic-Controlled Shutdown
1ms Guaranteed Startup
2.5V to 5.5V Input
-0.5V to (-VIN + 0.6V) Output at up to 4mA
Operates with One 4.7µF and Three 0.22µF Capacitors (no inductors needed)
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
下载
