ENGLISH 简体中文 日本語 한국어  



   
 
请输入关键词或器件型号    



MAX1481, MAX1484, MAX1485, MAX1486
软件可选的、半/全双工、限摆率、12Mbps、RS-485/RS-422收发器,µMAX封装


  快速浏览     技术文档     定购信息     更多信息     所有内容  
概述
完整的数据资料 (PDF, 392kB)
英文 下载数据资料(PDF)下载
The MAX1481/MAX1484/MAX1485/MAX1486 provide software-selectable, half-/full-duplex, low-power, slew-rate- limited, and high-speed (12Mbps) RS-485/RS-422 operation in a 10-pin µMAX® package—the smallest 10-pin package available.

The software-selectable, half-/full-duplex MAX1485/MAX1486 make obsolete the normally larger and more expensive solutions required for selectable half-/full-duplex RS-485/RS-422 operation: 1) a 14-pin, full-duplex transceiver configured via jumpers between receiver and transmitter lines, or 2) two 8-pin, half-duplex transceivers, which require an additional inverter logic gate for software selectability.

The MAX1481/MAX1484 are functionally equivalent to the industry-standard MAX491 and 75180, and are designed for space-constrained, full-duplex RS-422 applications.

All parts contain one driver and one receiver and feature a 1/8-unit-load receiver input impedance, allowing up to 256 transceivers on the bus. The MAX1481/MAX1485 feature reduced-slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission up to 250kbps. The MAX1484/MAX1486 driver slew rates are not limited, allowing them to transmit up to 12Mbps.

The MAX1481/MAX1484/MAX1485/MAX1486 draw only 300µA of supply current. The MAX1481 has a low-power shutdown mode that reduces supply current to only 0.1µA. All devices operate from a single 5V supply.

Drivers are output short-circuit current limited and are protected against excessive power dissipation by thermal-shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.

关键特性   应用/使用
  • 10-Pin µMAX Package: Smallest 10-Pin Package
  • Software-Selectable Half-/Full-Duplex Operation (MAX1485/MAX1486)
  • 0.1µA Low-Current Shutdown Mode (MAX1481)
  • Slew-Rate Limiting Allows Error-Free Data Transmission (MAX1481/MAX1485)
  • 12Mbps High-Speed Operation (MAX1484/MAX1486)
  • Allow up to 256 Transceivers on the Bus

 
  • 电池供电应用
  • 手持式装置
  • 工业控制局域网
  • 电平转换器
  • 低功耗RS-422/RS-485通信
  • 用于EMI敏感应用的收发器

    Key Specifications:   RS-422/485 Line Driver/Receivers
    Part Number Number of Tx/Rx Duplex Supply Voltage (V) Typ. ICC (mA) Data Rate (kbps) Tx EN Rx EN Typ. Shutdown ICC (µA) Number of Rx/Tx on Bus Package Price**
    MAX1481  1Tx + 1Rx Full 5 0.3 250 Yes Yes 0.1 256 µMAX/10 $1.15 @ 1k
    MAX1484  Full 12,000 Yes  -  $1.15 @ 1k
    MAX1485  Half/Full 250 No  -  $1.15 @ 1k
    MAX1486  Half/Full 12,000 No  -  $1.15 @ 1k
    See All RS-422/485 Line Driver/Receivers (159)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    参考文献: 19-1312; Rev. 1; 2006-12-20
    本页最后一次更新: 2007-06-01


            •         •         •     隐私权政策     •     法律声明

        © 2009 Maxim Integrated Products版权所有