ENGLISH 简体中文 日本語 한국어  

MAX197
多量程(±10V, ±5V, +10V, +5V)、单+5V、12位数DAS,8+4总线接口

±17V故障保护ADC,可通过软件选择输入量程


  快速浏览     技术文档     定购信息     更多信息     所有内容  
概述
完整的数据资料 (PDF, 616kB)
英文 Download this datasheet in PDF format下载

The MAX197 multi-range, 12-bit data-acquisition system (DAS) requires only a single +5V supply for operation, yet accepts signals at its analog inputs that may span both above the power-supply rail and below ground. This system provides 8 analog input channels that are independently software programmable for a variety of ranges: ±10V, ±5V, 0V to +10V, or 0V to +5V. This increases effective dynamic range to 14 bits, and provides the user flexibility to interface 4mA-to-20mA, ±12V, and ±15V powered sensors to a single +5V system. In addition, the converter is overvoltage tolerant to ±16.5V; a fault condition on any channel does not affect the conversion result of the selected channel. Other features include a 5MHz bandwidth track/hold, a 100ksps throughput rate, software-selectable internal or external clock and acquisition, 8+4 parallel interface, and an internal 4.096V or an external reference.

A hardware active-low SHDN pin and two programmable power-down modes (STBYPD, FULLPD) are provided for low-current shutdown between conversions. In STBYPD mode, the reference buffer remains active, eliminating start-up delays.

The MAX197 employs a standard microprocessor (µP) interface. A three-state data I/O port is configured to operate with 8-bit data buses, and data-access and bus-release timing specifications are compatible with most popular µPs. All logic inputs and outputs are TTL/CMOS compatible.

The MAX197 is available in 28-pin DIP, wide SO, SSOP, and ceramic SB packages.

For a different combination of ranges (±4V, ±2V, 0V to 4V, 0V to 2V), refer to the MAX199 data sheet. For 12-bit bus interface, refer to the MAX196 and MAX198 data sheets.

关键特性   应用/使用
  • 12-Bit Resolution, 1/2LSB Linearity
  • Single +5V Operation
  • Software-Selectable Input Ranges: ±10V, ±5V, 0V to 10V, 0V to 5V
  • Fault-Protected Input Multiplexer (±16.5V)
  • 8 Analog Input Channels
  • 6µs Conversion Time, 100ksps Sampling Rate
  • Internal or External Acquisition Control
  • Internal 4.096V or External Reference
  • Two Power-Down Modes
  • Internal or External Clock

 
  • 自动测试设备(ATE)
  • 数据采集
  • 工业控制系统
  • 医疗仪器
  • 机器人技术
  • 电信

    Key Specifications:   Precision ADCs (< 5Msps)
    Part Number ADC Resolution (Bits) Input Channels Conv. Rate (ksps) Max. Conv. Time (µs) Data Bus (Bits) Ref. (V) Input Range (V) Diff. In Supply Voltage (V) Typ. Supply Current (mA) Typ. Power (mW) Standby Mode Package Price**
    MAX197  12 8 100 6 µP/8 Ext
    Int +4.096
    ±10
    ±5
    10
    5
    No 5 6 30 Yes PDIP/28
    SOIC/28
    SSOP/28
    $9.90 @ 1k
    See All Precision ADCs (< 5Msps) (323)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    参考文献: 19-0381; Rev. 2; 2002-09-13
    本页最后一次更新: 2007-06-06



          隐私权政策    法律声明

          © 2008 Maxim Integrated Products, Dallas Semiconductor版权所有