The MAX1649/MAX1651 BiCMOS, step-down, DC-DC switching
controllers provide high efficiency over loads ranging from 1mA to more than 2.5A. A unique, current-limited pulse-frequency-modulated (PFM) control scheme gives these devices the benefits of pulse-width-modulation (PWM) converters (high efficiency at heavy loads), while using only 100µA of supply current (vs. 2mA to 10mA for PWM converters). Dropout performance down to 300mV is provided by a high switch duty cycle (96.5%) and a low current-sense threshold (110mV).
A high switching frequency (up to 300kHz) allows these devices to use miniature external components.
The MAX1649/MAX1651 have dropout voltages less than 0.3V at 500mA and accept input voltages up to 16V. Output voltages are preset at 5V (MAX1649), or 3.3V (MAX1651). They can also be adjusted to any voltage from 1.5V to the input voltage by using two resistors.
These step-down controllers drive external P-channel MOSFETs at loads greater than 12.5W. If less power is required, use the MAX639/MAX640/MAX653 step-down
converters with on-chip FETs, which allow up to a 225mA load current.
关键特性
应用/使用
More than 90% Efficiency (10mA to 1.5A Loads)
More than 12.5W Output Power
Less than 0.3V Dropout Voltage at 500mA
100µA Max Quiescent Supply Current
5µA Max Shutdown Supply Current
16V Max Input Voltage
5V (MAX1649), 3.3V (MAX1651), or Adjustable Output Voltage
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
下载
