ENGLISH 简体中文 日本語 한국어  

按类别选择应用笔记

  按类别选择

按型号选择

输入型号的任何部分
最新应用笔记  

光纤电路

打开新页面 3.3V单电源供电、以622Mbps驱动激光二极管
打开新页面 Guide and Index to Fiber/HF Communications Notes
打开新页面 低噪声APD偏置电路
打开新页面 均衡千兆位铜缆连接的IC
打开新页面 数字控制功率和调制的可视激励驱动器
打开新页面 统计置信度应用于误差概率估计

高速数字接口
打开新页面 HFAN-01.0.1: Interfacing Single-Ended PECL to Differential PECL and Differential PECL to Single-Ended PECL
打开新页面 HFAN-01.0: LVDS、PECL和CML介绍
打开新页面 HFAN-01.1: Choosing AC-Coupling Capacitors

高速测量
打开新页面 HFAN-04.5.3: 用于4Gbps 850nm FC接收机的极限测试源
打开新页面 HFAN-05.1.0: Single-Ended and Differential S-Parameters

高速信号完整性
打开新页面 HFAN-06.0.1: Equalizing Gigabit-per-Second Signals on Copper Media
打开新页面 HFAN-06.1: Input/Output Models for Maxim Fiber Components
打开新页面 HFAN-06.2: IBIS Data for CML, PECL, and LVDS Interface Circuits

抖动
打开新页面 HFAN-04.0.2: Converting between RMS and Peak-to-Peak Jitter at a Specified BER
打开新页面 HFAN-04.0.3: Jitter in Digital Communication Systems, Part 1
打开新页面 HFAN-04.0.4: Jitter in Digital Communication Systems, Part 2
打开新页面 HFAN-04.3.0: Jitter Specifications Made Easy: A Heuristic Discussion of Fibre Channel and Gigabit Ethernet Methods
打开新页面 HFAN-04.5.0: Measuring Deterministic Jitter with a K28.5 Pattern and an Oscilloscope
打开新页面 HFAN-04.5.1: Measuring Random Jitter on a Digital Sampling Oscilloscope
打开新页面 HFAN-04.5.3: 用于4Gbps 850nm FC接收机的极限测试源
打开新页面 HFAN-04.5.4: 双绞线不平衡时会产生‘抖动’

机械装配与散热问题
打开新页面 HFAN-08.0.1: Understanding Bonding Coordinates and Physical Die Size
打开新页面 HFAN-08.1: Thermal Considerations of QFN and Other Exposed-Paddle Packages
打开新页面 HFAN-08.2.1: PWM Temperature Controller for Thermoelectric Modules Keeps Components within 0.1°C

光控制与监视
打开新页面 Behind the Light Show in Optical Transceivers
打开新页面 Compact DWDM laser Temperature Control with the MAX8521
打开新页面 Considerations for the DS1847/DS1848 Look-Up Tables
打开新页面 DS1845/DS1855 Temperature Coefficient Analysis
打开新页面 DS1847/DS1848 Online Interactive Temperature Calculator
打开新页面 DS1847/DS1848 Temperature Coefficient Supplement
打开新页面 DS1858 Analog Monitor Input Online Interactive Calculator Temperature-Controlled Resistors with Three Monitors
打开新页面 DS1865速查指南
打开新页面 How to Add an Offset to the DS1859 Temperature Reading
打开新页面 How to Calibrate a DS1862 Using an External Temperature Sensor
打开新页面 How to Interpret DS1847/DS1848 Temperature Readings
打开新页面 How to Interpret DS1852 Temperature and Voltage Readings
打开新页面 How to Interpret DS1854, DS1857, and DS1858 Temperature and Voltage Readings
打开新页面 How to Program the Bias DAC in Manual Mode for the DS1863/DS1865 PON Controllers
打开新页面 Implementing Internal Calibration Using the DS1858
打开新页面 Interfacing Digitally Controlled Potentiometers and Resistors to Laser Drivers
打开新页面 Interfacing Digitally Controlled Pots and Resistors to Laser Drivers
打开新页面 MAX3740激光驱动器的精确功率控制
打开新页面 Methods of Controlling Laser Drivers: POTs and DACs
打开新页面 Monitor Calibration in Fiber Optic Applications
打开新页面 Regenerating the DS1847/DS1848 Resistor Calibration Constants
打开新页面 Side-by-Side Comparison of Fiber-Monitoring and Control ICs
打开新页面 Stabilizing Thermoelectric Controller (TEC) Loops Using a Unit-Step Response
打开新页面 Using DS3902 in Low Cost Optical Modules
打开新页面 Using the DS1859 with External EEPROM
打开新页面 Visible-Laser Driver Has Digitally Controlled Power Modulation
打开新页面 利用DS1864提高APD的RSSI校准
打开新页面 在同一条I2C总线上挂接多个DS1859器件
打开新页面 如何将DS1864的电流DAC转换成电压DAC
打开新页面 如何提高MAX4007的工作速度
打开新页面 采用简单的稳压电路为高边电流监测器提供恒定电压
打开新页面 雪崩光电二极管监测电路将电流限制到1mA,有效改善瞬态响应

器件规格设计笔记
打开新页面 MAX3265: Interfacing the MAX3265 to the MAX3875
打开新页面 MAX3265: Using MAX3265 LOS in GBICs
打开新页面 MAX3274: MAX3274 Optimizes Dual-Rate, Fibre Channel Receivers
打开新页面 MAX3610: MAX3610基于频率合成器的晶体振荡器,构建低成本、高性能时钟源
打开新页面 MAX3643: MAX3643激光驱动器与低成本微控制器的配合使用
打开新页面 MAX3645: 用MAX3645替代Mindspeed MC2045-2/2Y
打开新页面 MAX3654: 利用MAX3654在GPON ONT视频应用中获取大信号输出
打开新页面 MAX3656: Using the MAX3656 Laser Driver to Transmit Serial Digital Video with Pathological Patterns
打开新页面 MAX3656: 在GPON/GEPON ONT应用中,针对激光器长引线,优化MAX3656输出网络
打开新页面 MAX3667: Driving A Laser Diode With the MAX3667 From A Single +3.3V Power Supply
打开新页面 MAX3670: Loop Bandwidth Calculator for the MAX3670
打开新页面 MAX3670: Loop-Filter Configuration for the MAX3670 Low-Jitter PLL Reference Clock Generator
打开新页面 MAX3701: Interfacing the MAX3701 to a Blue/Violet Laser Diode [Application Brief]
打开新页面 MAX3735: Choosing the APC Loop Capacitors Used with MAX3735/MAX3735A SFP Module Designs
打开新页面 MAX3735: 在小外型(SFF)收发模块中使用MAX3735
打开新页面 MAX3735A: MAX3735A激光驱动器输出配置,第3部分: 差分驱动
打开新页面 MAX3735A: MAX3735A输出配置,第1部分: 直流耦合优化技术
打开新页面 MAX3735A: MAX3735A输出配置,第4部分: 驱动VCSEL
打开新页面 MAX3735A: 与DS1859接口时的特殊注意事项
打开新页面 MAX3740: MAX3740/MAX3795激光驱动器平均功率监视器
打开新页面 MAX3800: Equalizing Gigabit Copper Cable Links with the MAX3800
打开新页面 MAX3815: MAX3815 DVI/HDMI电缆均衡器的连接
打开新页面 MAX3831: Disabling the Channel-Assignment Feature of the MAX3831
打开新页面 MAX3840: Line and System Loopback with the MAX3840
打开新页面 MAX3861: Configuring the MAX3861 AGC Amp as an SFP Limiting Amplifier with RSSI
打开新页面 MAX3865: The MAX3865 Laser Driver with Automatic Modulation Control
打开新页面 MAX3867: Modification of the MAX3867 for Burst-Mode Applications
打开新页面 MAX3872: Choosing an Optimal Filter Capacitor for the MAX3872 Multi-Rate CDR
打开新页面 MAX3892: 2.7Gbps Transponder Applications Using the MAX3892, MAX3882, and MAX3670 Chipset
打开新页面 MAX3905: MOST Automotive Transmitter Using the MAX3905 and an ULM Photonics VCSEL
打开新页面 MAX3905: Output Current Calculator for the MAX3905
打开新页面 MAX3930: Simulating Direct Laser Modulation with the MAX3930
打开新页面 MAX3950: Printed Circuit Card Layout Considerations for 10Gbps Current Mode Logic Inputs on the MAX3950 EVKIT
打开新页面 MAX3967A: 利用MAX3967A及峰化电路改善低速LED的响应特性
打开新页面 MAX3980: Equalizing XAUI Backplanes with the MAX3980
打开新页面 MAX3983: Designing for 10Gbase-CX4 Transmitter Template Compliance with the MAX3983
打开新页面 MAX3983: Equalize 10Gbase-CX4 and Copper InfiniBand Links with the MAX3983
打开新页面 MAX3991: 采用MAX3991实现10Gbps光接收器信号丢失精确探测
打开新页面 构建突发模式应用中的TX功率检测器(采用MAX3643和DS1863或DS1865)

接收器接口
打开新页面 HFAN-03.0.0: Accurately Estimating Optical Receiver Sensitivity
打开新页面 HFAN-03.0.1: Setting a LOP (Loss of Power) Threshold Level Equivalent to a BER Level of 10-3
打开新页面 HFAN-03.0.2: Optical Receiver Performance Evaluation
打开新页面 HFAN-03.1.1: Digitally Programmable Low-Noise Avalanche Photo Detector (APD) Bias Circuit
打开新页面 HFAN-03.2.0: 提高PIN-TIA ROSA的噪声抑制能力
打开新页面 HFAN-04.5.3: 用于4Gbps 850nm FC接收机的极限测试源

系统
打开新页面 HFAN-04.5.3: 用于4Gbps 850nm FC接收机的极限测试源
打开新页面 HFAN-09.0.1: NRZ Bandwidth - HF Cutoff vs. SNR
打开新页面 HFAN-09.0.2: Optical Signal-to-Noise Ratio and the Q-Factor in Fiber-Optic Communications Systems
打开新页面 HFAN-09.0.3: APON Class A, B, & C Physical Layer Requirements
打开新页面 HFAN-09.0.4: NRZ Bandwidth - LF Cutoff and Baseline Wander
打开新页面 HFAN-09.1.0: 发射器RIN对光纤链路性能的影响
打开新页面 HFAN-09.2.0: 在PON突发模式激光驱动器中利用热敏电阻补偿温度引起的效率变化
打开新页面 HFAN-09.5.0: 码型创建器/转换器软件用户手册

技术文章
打开新页面 HFTA-05.0: Statistical Confidence Levels for Estimating BER Probability
打开新页面 HFTA-06.0: Designing a Simple, Small, Wide-Band and Low-Power Equalizer for FR4 Copper Links
打开新页面 HFTA-07.0: Precision Reference Clock Usage in Clock and Data Recovery Circuits
打开新页面 HFTA-08.0: DWDM系统中的接收机和发射机
打开新页面 HFTA-09.0: T3/E3/STS-1 Fiber Optic Extension
打开新页面 HFTA-10.0: Physical Layer Performance: Testing the Bit Error Ratio (BER)
打开新页面 HFTA-11.0: Spectral Content of NRZ Test Patterns
打开新页面 HFTA-12.0: Measuring Crosstalk Penalty in High-Speed Bidirectional Serial Communication Modules
打开新页面 HFTA-13.0: Designing External Cabling for Low EMI Radiation
打开新页面 HFTA-14.0 接收器的设计挑战
打开新页面 HFTA-16.0:双极型集成电路的ESD保护
打开新页面 NRZ测试码型的频谱成分

发送器接口
打开新页面 HFAN-02.0.1: Parasitic Inductance Effects in 10Gbps Fiber Optic Design
打开新页面 HFAN-02.0.2: Laser Diode to Single-Mode Fiber Coupling Efficiency: Part 1 - Butt Coupling
打开新页面 HFAN-02.0: Interfacing Maxim Laser Drivers With Laser Diodes
打开新页面 HFAN-02.2.0: Extinction Ratio and Power Penalty
打开新页面 HFAN-02.2.1: Maintaining the Extinction Ratio of Optical Transmitters Using K-Factor Control
打开新页面 HFAN-02.2.2: Optical Modulation Amplitude and Extinction Ratio
打开新页面 HFAN-02.3.1: Maintaining Average Power and Extinction Ratio, Part 1, Slope Efficiency and Threshold Current
打开新页面 HFAN-02.3.2: Maintaining Average Power and Extinction Ratio, Part 2, MAX3863 Laser Driver and DS1847 Digital Resistor
打开新页面 HFAN-02.3.3: Optimizing the Resolution of Laser Driver Current Settings Using a Linear Digital Potentiometer
打开新页面 HFAN-02.4.0: Over-Voltage Protection for SFP Laser Drivers [Application Brief]
打开新页面 HFAN-02.5.0: 激光二极管的单端和差分驱动比较
打开新页面 HFAN-02.6.0: 减小低速(<622Mbps)光发送器的噪声和漂移
打开新页面 HFAN-02.7.0 Reducing Laser Driver Output Noise When No Input Signal Is Applied

返回分类索引

信息更新通知
最先获得新出版的应用笔记,请订阅每周更新的EE-Mail™ – 应用笔记 (English only)。


         



   © 2008 Maxim Integrated Products, Dallas Semiconductor版权所有    法律声明    隐私权政策